Automobile Collision Repair Equipment SY-388E with lifting function
1. power of the whole machine is Triple out Electric Pump Station,
platforms rise and fall, two towers pulling and stretch, can be
achieved with only one remote control their own independent
operations, so as to realize centralized control. A key in
hand,manipulation of freely.
2. Totally enclosed three-way hydraulic piping, electrical
controls, not influenced by the external environment, and can
demolition .installation, the failure rate is very low.
3. Parallel self-locking hydraulic lifting platform, 300-1080mm in
accordance with the maintenance of the use of arbitrary adjustment
requirements, and allocation of mechanical looking devices, safe
and convenient operation
4. Flat plate and square hole working platform, the entire platform
assembled by the large cutting CNC machining equipment result of
the high intensity of the plane. No work blind spot.
5. The pulling towers can work along the track for 3600 rotation,
unique wheel rotation, the pulling towers move more stable, more
6. The unique design of the main clamps spiral movements, in the
jaw to maintain the level of the state, the upper and lower pole
vertically movements, fine-tuning the level of all kinds of
different vehicle chassis height of rapid adjustment.
7. Famous universal clamping system anchors any passage car,
pickup, SUV with auto-skirt quickly and rock-solid
8. The tools mechanical streamline design, after metal, heat
treatment process, long service life and high intensity, almost
considered all deformation correction.
9. Three-dimentional coordinate (PTP) measure system, the most
advanced measurement of the world,seamless breakpoint ,convenient
Air Supply Required
Radius of pulling
●Flat plate and square hole working platform is made through the
It is made of High-quality manganese steel, then CNC Plasma
Cutting, Panasonic CO2 welding machine, the whole surface plane,
large shot- blasting machine remove rust and welding slag,
Eliminate welding stress, electrostatic painting, so that make sure
the requirements of using strength , rust prevention, and the
●Parallel self-locking hydraulic lifting platform, lifting stable
and the fast lifting speed .The lifting platform is provided double
safety by hydraulic pressure and mechanical locking devices, so
that make sure any of the accident car is convenient for up and
down .The lifting range is 300mm-1080mm, so the frame height can be
adjusted freely in the range according to the repair needs.
●The pulling towers can work along the track for 360° rotation,
operated more convenient. The pulling towers pull strong each other
and highly active, and the material is made of the 10mm wall
thickness seamless pipe.
●The jaw of main clamps, spiral movements, in the jaw to maintain
the level of state, the upper and lower pole vertically movements,
fine-tuning the level of all kinds of different vehicle chassis
height of rapid adjustment .
The unique design of workholding jaw, it is fixed by only two
bolts, table top needle jaw to make sure every type car is quickly
and firmly clamped, improve efficiency.
●The tools mechanical streamline design, almost considered any
deformation correction. Lifetime limited warranty under normal use
and in according to the requirement of equipment use.
●The function of leading arm: provide stretching for any point and
any directions during the collision repair process, provide
powerful up stretching.
●Pneumatic jack beam(three layers):
Only press air to be as power supply, the speed up ,can lift 3 ton,
the lowest point is 150mm, the highest point is 450mm, easy to
move, and can easily adjust the chassis height, install main clamps
when repair different incident vehicle chassis height, it can be
independently used as hydraulic floor jacks.
●High Precision alloy measuring system, it is made of special
aluminum. It can make three-dimensional coordinate measure, so that
make the car body size is same as the original car.
●To allocate one centralized electric control cabinet. Remote
control: A key in hand, operate freely.
Remote controller: Make the platform lift, please press “up” key;
make the platform down, please press the “down” key. When you need
the tower up and down stretching, please press “tower one” key or
“tower two” key
●The global data synchronization by Mitchell and the major
automotive companies provide and maintain the latest data models.
●Perfect service system, completely relieve your worries.