953D Technical features:
2 group of industrial camera (take photo)+four target panel(reflect
image) +special software
*push the vehicle:push the vehicle forward and rearward 12-18cm (or 30-40o) to complete the measurement and eccentricity compensation.
*rotate the wheel:lift the vehicle up to the height of the wheel leave the ground and
rotate the wheel 30-40oto complete the measurement.
Push vehicle indication:
* direction: push the vehicle as per the arrow indication.
* distance: indicate the push distance through the timely changing
data show on the screen
status: indicate the operator that the measurement is completed
through the animation “Stop” and the word “complete pushing
* the distance between the camera and the distance of the target
panel center allowed to be in the arrange of 2.450mm-2.750mm.
*suitable for the wheel of 13”-22”
*search the target panel through adjusting the height of the cameraautomatically.
* raise the lift to adjust the target panel into the optical field.
*25000 vehicle data covering most majority of the main vehicle
model around the world.
*vehicle data update is synchro with Autodata, which is complete,
correct and reliable.
* display the data with the unit of degree, degree and minute,
* quick search the vehicle model as per letter order, manufacturer,
model and produce year.
* obvious and dynamic interface, with picture and essay, which will
guide the operator, and make the operation easier.
* the operation video is available to be loaded and instruct the
operator to use correctly.
* the 3D animation of adjusting and the real vehicle adjusting
video is available to be loaded to be the reference to the
* with the function of the independent menu of diagnosis and
maintenance, assure the using efficiency of the equipment.
* the quick measurement could be carried out by shortcut menu.
* the optical sensors were replaced by advanced technology and
mature spare parts, therefore, the stability of 3D wheel alignment
will not be affected and interfered by electricity, circuit, strong
light, temperature, battery and voltage.
* compare the measurement principle, laser is point, CCD is line,
3D is side, measurement result of 3D is much more reliable.
effectively measure front and rear toe, camber and camber
difference, KPI, caster, set-back, and thrust line angle.
Voltage: 110/220V ±10V, 50HZ ±1HZ, independent power supply, must
be earth connected.
Spare parts package